Canon MultiPASS F20 Setup

Also see for MultiPASS F20: Basic guide Software user's guide Specification

Contents

Install the software.IMPORTANT• DO NOT connect the USB cable before installing the software.NOTE• Windows 98/Me users: You need to have “Client for Microsoft Networks“ installed beforeinstalling the MultiPASS Suite software. For details, refer to p. 10-1 of the Basic Guide.• When installing the software in Windows XP or Windows 2000, log onto the system as amember of the Administrator group.• If you have previously installed an earlier version of the MultiPASS Suite software(version 4.2 or earlier), you must remove it before installing this version. For details onremoving the software, refer to the documentation of the previous version.1 Make sure both your machine and computer are turned on.2 On your computer, close any open applications, including virus checkers.3 Insert the MultiPASS Suite CD-ROM into your CD-ROM drive.• The setup program should start automatically. If it does not, double-click [MyComputer] in the Windows screen, double-click the CD-ROM icon, then double-click[csplash] or [csplash.exe].4 When the next screen appears, clickINSTALL MULTIPASS SUITE.5 Follow the on-screen instructions.6 When the message below appears, remove the label A from the USB port Blocated on the back of the machine. Then connect a USB cable C (not included)to the machine and computer.Windows 98/Me/2000 Windows XPNOTE• If you cannot continue withthe installation afterconnecting the USB cable,refer to p. 10-1 of the BasicGuide.C USB label AB

/ 8

Related manuals for Canon MultiPASS F20