Canon MultiPASS L6000 Quick Start Manual

Also see for CFX-L3500 IF: Parts list

Contents

1Carefully removeall items fromthe box.Remove the items from the documentation package.Remove these hardware items from the top tray:2Important! Before you start, make sure you have the following computer setup.(These are the minimum requirements.)IBM® PC or compatible computer with a 486 PC processor or better(Pentium® recommended)Microsoft® Windows® 95 (not compatible with Windows 3.1)16 megabytes (MB) of RAMHard disk space:MultiPASS Printer Driver, MultiPASS Desktop Manager for Windows 95,and ScanGear™ for MultiPASS – 25 MBWebRecord™ – 8 MBInternet Utilities 97™ – 7 MBAT&T WorldNet SM Service including Microsoft Internet Explorer – 36 MBBi-directional, Centronics®-compatible parallel cable (IEEE 1284-compliant);a cable less than 6.6 feet in length is recommended14.4 Kbps modem or faster (28.2 Kbps recommended)Standard telephone lineCD ROM drive (2x or better) (If you do not have a CD ROM drive, you can callthe Canon Customer Care Center to order the MultiPASS Desktop Manager andPrinter Setup on diskettes. See page 23 for details.)Lift out the MultiPASS unit.Always lift the unit from the bottom.PAPER RESTTELEPHONELINEPOWERCORDSUPPORT TRAYSFX-3 TONERCARTRIDGEImportant! Save the box and shippingmaterials. You may need them later ifyou have to transport the MultiPASS.Unpack the MultiPASS L6000PAPER LOADINGLABELEXTENSION TRAY