Chapter 10 Maintenance 81Checking The Ink levelIf you reset the ink counter when you installed/replaced the ink tanks, you can check the currentink level of the ink tanks at any time.To check the current ink level of the ink tanks, press [COPY], [SCAN], or [PHOTO PRINT].The LCD will display the ink level for approx. three seconds.Indicates the remaining ink volume at three different levels.? Indicates the ink counter was not reset after replacing the ink tanks.NOTE• The LCD will not display the ink level when <LOW INK WARNING> is set to <OFF>.3 Press [Set].4 Use [W] or [X] to select <2.INK COUNT RESET>.5 Press [Set].• The LCD displays a message asking if you replaced the black ink tank.NOTE• Do not press any keys other than [W] or [X].6 If you replaced the black ink tank, press [W]. If you did not, press [X].• The LCD displays a message asking if you replaced the color ink tank.7 If you replaced the color ink tank, press [W]. If you did not, press [X].• The ink counter is now reset.NOTE• Press [Stop/Reset] to switch the machine to standby mode.INK VOLUME1.LOW INK WARNINGINK VOLUME2.INK COUNT RESETBLACK INK CHANGED?- YES NO +COLOR INK CHANGED?- YES NO +Ex: COPY MODECOL BLK
