Canon MultiPASS MP700 Setup Sheet

Also see for MultiPASS MP700: User guide Service manual Quick reference guide Service manual Brochure

Contents

Install the ink tanks.1 Start with the yellow ink tank. Pull the orange tape in the direction of the arrowand remove the plastic wrapper so you can see the air hole A. Turn the ink tankover so that the protective cap B is facing up. Then hold the ink tank as shownbelow and remove the protective cap B.NOTE• To avoid spilling ink, neverpress on the long sides ofthe ink tank C.• Once you remove theprotective cap B, do nottouch the ink port D.2 Insert the ink tank (label-side up) into the correct slot (refer to the color guide onthe printhead). Press down gently on the ink tank until an audible click is heard.3 Repeat steps 1 and 2 to install the remaining magenta, cyan, and black ink tanks.IMPORTANT• Make sure the ink tanks are inserted allthe way into their slots.4 Close the scanning unit until it locks into place.Align the printhead as explained in step 9.Align the printhead.NOTE• You can also align the printhead from the software.For details, refer to the Software Guide.1 When the LCD A displays the following, press [Set].NOTE• If a display other than PRINT HEAD> appears, refer top. 9-5 of the Quick ReferenceGuide to align the printhead.A L I G N P R I N T H E A DP R E S S S E T K E Y ABlackYellowMagentaCianBlackBCI-3eCBCI-3eBKBCI-3eM BCI-3eYYellowMagentaCianPUSH PUSH PUSHPUSHBlackBlackBCI-3eCBCI-3eBKBCI-3eMBCI-3eYYellowMagentaCianPUSH PUSHPUSHBlackPUSHYellowMagentaCianBlackCorrect position Incorrect positionBlackYellowMagentaCianBlackBCI-3eYYellowPUSHBlackYellowMagentaCianBlackBCI-3eYYellowPUSHPUSUYellowMade in JapanInk TankBCI-3eYPULLPULLBCI-3eYInk TankABBD C

/ 8

Related manuals for Canon MultiPASS MP700