108Selecting the Drive ModeChanging the Drive Mode1. Set the program selector to Q.2. Press the DRIVE MODE button to switch between the drive modes.The setting changes with each press of the button.Continuous Shooting/High-Speed Continuous ShootingPress and hold the PHOTO button.A series of still images will be recorded as long as you hold the PHOTO button.❍ Maximum number of continuous shots at one time:These figures are approximate and vary with the recording conditions and subjects.Sufficient space on the memory card is required. Continuous shooting stops when card is full.❍ The number of frames per second may be lower when “ ” (camcordershake warning) is displayed on the screen.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERAStill Image Size Maximum Numberof Continuous Shots1632 × 1224 2 frames 3 frames 10 images1280 × 960 3 frames 5 frames 10 images640 × 480 3 frames 5 frames 60 imagesFrames per SecondNormal speed High speedContinuousShootingHigh-SpeedContinuous ShootingAEB (AutoExposure Bracketing)SingleCaptures a quick series of still images while you press thePHOTO button. For the number of frames per second, refer tothe table below.The camcorder records a still image in three differentexposures (dark, normal, light in 1/2 EV steps), allowing you tochoose the perfect exposed shot.Records a single still image when you press the PHOTO button.PHOTO buttonDRIVE MODE button
