60 Applying the Camcorder Settings from the Computer Adding Still Images to the [My Camera] WindowBy adding an image to the [Computer] list, you can upload the image to thecamcorder for use as Start-up Image. Only still images with JPEG compressioncan be added to the list.1 In the [My Camera] window, select [Start-up Image] in the[Type] list and click [Add].The [Select an image to add] window appears.2 Select the still image file (JPEG) you wish to save and click[Open].The selected file appears in the [Computer] list. You can now save the newlyadded file to the camcorder using the procedures described in Changing the MyCamera Settings ( 58).To delete a setting, select the file and click the [Send to Trash] button below the[Computer] list.Applying DPOF SettingsYou can select images and the number of prints for automatic printing on a DPOF(Digital Print Order Format)-compliant printer. You can set the DPOF printsettings also on the camcorder. When you are using a SD memory card, make sure the protect switch is setto allow recording. The [Edit Slide/DPOF] window allows print settings on up to 998 still images.With some camcorders, DPOF print settings are limited to a maximum of 200still images. In that case, all DPOF print settings on the 201st still image andonward will be erased. If 999 or more images are recorded on a memory card, the [Edit Slide/DPOF] window may not operate properly. To set the number of prints, reducethe number of images on a memory card to 998 or less.