107PrintingEPrintingPrinting Still ImagesYou can print still images by connecting the camcorder to a printer with direct printfunction. You can also use the print order settings for direct printing ( 116).Following printers can be connected to your camcorder:Connecting the Printer to the Camcorder1. Turn off the camcorder and insert a memory card that contains stillimages.2. Turn on the printer.3. Set the camcorder to mode.4. Connect the camcorder to the printer using the cable.• appears and changes to , or . Does not appear with movies, or stillimages that cannot be played back with the camcorder.• The (print/share) button lights up and the current print setting will be displayedfor approx. 6 seconds.If continues to flash (for more than 1 minute) or if , or does notappear, the camcorder is not correctly connected to the printer. In such case,disconnect the cable from camcorder and printer, turn off camcorder and printer,turn both back on and reconnect the camcorder to the printer. A “ ” will display for images that cannot be printed. Refer to the instruction manual of each printer for information on which interfacecable to use with the camcorder.The Canon CP-Printers CP-10 and CP-100 are supplied with two directinterface cables. Use the cable with the USB logo on the connector (DIF-100). We recommend powering the camcorder from a household power source. Refer also to the instruction manual of the respective printer.CanonPrintersBubble Jet Direct compatible PIXMAprinters and PictBridge compatibleSELPHY DS/PIXMA printersDirect Print compatible CP printers andPictBridge compatible SELPHY CPprinters.PictBridge compliant non-Canon PrinterPrinter with direct printfunctionOpen the terminal cover
