Canon PIXMA G3020 Series Getting Started

Also see for Pixma G3020 Series: Online manual Getting started Online manual

3ENGLISH7 Replace the tank cap securely.8 Repeat steps 2 through 7 to pour all ink into thecorresponding ink tanks on the right.C M YCheck!9 Close the scanning unit / cover.• Open the scanning unit / cover fully and then close it.ba CautionWatch your fingers.10 When the following screen appears, use the [and ] buttons to select Yes, and then press theOK button.• Please wait momentarily until the following screenappears. Follow the on-screen instructions, and thenpress the OK button.If you will use the printer without connecting any otherdevices, setup is now complete.Select the connection method that best matches how youwill use the printer.• To use the printer without connecting to any otherdevicesSetup is now complete.• To use the printer connecting to a computer orsmartphoneProceed to the next page.Check the support code, and then follow theinstructions if the displayed code is written below.• 1890Protective material remaining."2. Removing Packing Materials" on page 1• 1470Print heads are not installed correctly."3. Installing the Print Heads" on page 1• 1471Print heads cannot be recognized."3. Installing the Print Heads" on page 1• 5200Ink system preparation was not completed successfully.Press the ON button to restart the printer, and then see "5.Pouring Ink" on page 2.For all other cases, refer to the Online Manual.If an error message (support code) appears onthe screenSupport code