Canon PIXMA G3560 Online Manual

Also see for PIXMA G2060 Series: Getting started Getting started Online manual

Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation.Custom Settings1. Open the Canon IJ Printer Assistant Tool2. Check that the printer is on and then click Custom SettingsThe Custom Settings dialog box opens.Note• If the printer is off or if communication between the printer and the computer is disabled, anerror message may appear because the computer cannot collect the printer status.If this happens, click OK to display the most recent settings specified on your computer.3. If necessary, complete the following settings:Prevents paper abrasionThe printer can increase the gap between the print head and the paper during high-densityprinting to prevents paper abrasion.Check this check box to prevent paper abrasion.Align heads manuallyUsually, the Print Head Alignment function in the Canon IJ Printer Assistant Tool is set toautomatic head alignment, but you can change it to manual head alignment.If the printing results of automatic Print Head Alignment are not satisfactory, perform manual headalignment.Check this check box to perform the manual head alignment. Uncheck this check box to performthe automatic head alignment.Rotate 90 degrees left when orientation is [Landscape]On the Page Setup tab, you can change the rotation direction of the Landscape in theOrientation.To rotate the print data 90 degrees to the left during printing, select this item. To rotate the printdata 90 degrees to the right during printing, clear this item.Important• Do not change this setting while the print job is displayed in the print wait list. Otherwise,characters may be omitted or the layout may become corrupt.Note• If Envelope Com 10, Envelope DL, Yougata 4 4.13"x9.25", Yougata 6 3.86"x7.48",Envelope C5, or Envelope Monarch 3.88"x7.5" 98.4x190.5mm is selected for Page Sizeon the Page Setup tab, the printer rotates the paper 90 degrees to the left to print, regardlessof the Rotate 90 degrees left when orientation is [Landscape] setting.130