Canon PIXMA G5010 Getting Started

Also see for PIXMA G5000 Series: Getting started Getting started Online manual Online manual

3ENGLISH3 When the following screen appears, use the [and ] buttons to select a language, and thenpress the OK button.ImportantIf an error appears on the screen, see "If an error message(support code) appears on the screen" on page 3 andfollow the instructions.6. Loading Paper1 When the following screen appears, use the [and ] buttons to select Yes, and then press theOK button.2 Remove the cassette from the printer.3 Slide apart the paper guides.• Slide the right paper guide to the right edge. Alignthe front paper guide with the Letter or A4 mark.4 Load paper.• Load 2 or more sheets of Letter or A4 sized plainpaper with the print side facing down.• Place the paper against the front paper guide, andalign the right paper guide to the width of the paper.a b5 Replace the cassette.6 Pull out the paper output tray.7 Follow the on-screen instructions, and thenpress the OK button.• Check that Ready to connect appears on theprinter's screen.Check the support code, and then follow theinstructions if the displayed code is written below.• 1890The protective materials are not removed."2. Removing Packing Materials" on page 1• 1470The print heads are not installed correctly."3. Installing the Print Heads" on page 1• 1471No print heads are installed."3. Installing the Print Heads" on page 1• 1642There may be insufficient ink."4. Pouring Ink" on page 2For all other cases, refer to the Online Manual.If an error message (support code) appears onthe screenSupport code