Canon PIXMA MG5500 Series Setup Manual

Also see for PIXMA MG5500 Series: Quick start guide Quick guide Online manual Manual Online manual

Contents

WEPThe WEP Key is Not Displayed AutomaticallyRefer to the manual supplied with the access point or contact its manufacturer.Failed to connect to the access point.Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2, 3or 4 of the access point, set to use WEP key number 1, or select a WEP key number by entering wireless connectionsettings of the printer directly.For details on how to change the WEP key number of the access point, refer to the manual supplied with the accesspoint or contact its manufacturer.If the problem is not resolved, there may be other causes.See also the sections below:If the DHCP function of the access point is inactive, enable the DHCP function and configure wireless connectionsettings again.For details on how to check or change the settings of the access point, refer to the manual supplied with the accesspoint or contact its manufacturer.If using an access point that automatically creates WEP keys, check the WEP key (hexadecimal) createdautomatically on the access point, then enter it on the printer.For details on how to check the specifications of the access point, refer to the manual supplied with the accesspoint or contact its manufacturer.WLAN setting listIf the MAC address filtering is enabled on the access point, change settings so that the MAC address of the printerwill be accepted.Follow the procedure below to check the MAC address of the printer.1. Press the HOME button.2. Display Setup, then press the right Function button.3. Select Device settings, then press the OK button.4. Select LAN settings > Confirm LAN settings > WLAN setting list to check MAC address.For details on how to change the settings of the access point, refer to the manual supplied with the access point orcontact its manufacturer.••••

/ 25

Related manuals for Canon PIXMA MG5500 Series