DEACTIVATE INK LEVEL DETECTION FUNCTIONIMPORTANT TIP: When using a recycled or remanufactured inkjet cartridge, you must deactivate the ink levelfeature to allow your printer to run properly each time a recycled cartridge is installed. Check the followingtips to fix the ‘low ink’ error message when the cartridge is initially replaced. The ink level data is stored in thechip memory; ink level will display correctly each time a new cartridge is installed after this deactivation processis performed. Below are methods to deactivate the ink level detection function for models indicated.TIPS, TRICKS AND TROUBLE SHOOTING FOR USINGRECYCLED CARTRIDGES IN CANON PRINTERSMETHOD I:Press RESUME/CANCEL button once.Related models:BJC series: bjc3000, 8200, etc.S series: s400, 600, 800, 6300, 9000, etc.i Series: i255, 320, 350, 355, 450, 470d, 550,560, 850, 950, 6100, 6500, 9100, etc.Pixma series: ip1000, 1200, 1300, 1500,1600, 1700, 2000, 2200, 3000, 4000, etc.METHOD II:Hold down RESUME/CANCEL button for5 seconds or more.Related models:Latest models of Pixma series: ip1880,1980, 3300, 3500, 4200, 4500, 5200, 6700d,pro9000, 9500, ix4000, 5000, etc.METHOD III:Press START button once, select COLORbutton for color cartridge; BLACK button forblack cartridge.Applicable models:Pixma MP150, 160, 170, 180, 450, 460,475, etc.METHOD IV:Hold down STOP/RESET button for5 seconds or more.Applicable models:Latest models of Pixma MP/MX series:MP145, 228, 240, 250, 520, 800, 850, 970,MX308, 310, 318, 7600, etc.Receive Fax Document After Deactivating‘Ink Level Detection’ FunctionRelated models:Canon Pixma MX Series MX308, 318, 700,7600, etc.You can immediately copy or print receiveddocuments from the computer after deacti-vating the Ink Level Detection function. Bydefault setting, printing fax documents in‘low ink’ or ‘ink level unknown’ condition isset at OFF. This prevents the user fromprinting a blank page. Incoming faxeddocuments are received and held inmemory. To print or delete the document(s),access the MEMORY REFERENCE menuby following these steps:Press MENU button until FAX SETTING appears.Select RX SETTING, press Ok.Auto Print RX : ON, press Ok.Print When No Ink: ON, press Ok.Ink level detection is not activated. Cartridge canrun out of ink.Description: Low Ink Warning / Ink Runs OutBlinking in Orange: 4 timesRelated models:Canon bjc series: bjc3000, 6200Canon s series: s300, 400, 450, 4500, 520,600, 820, 6300, 9000.Canon i series: i250, 255, 320, 355, 450,455, 550, 560, 6100, 6500, 850, 865, 905d,950, 9100.Canon pixma series: ip1000, 1200, 1300,1500, 1600, 1700, 1800, 1880, 2580, 3000,3300, 3500, 4000, 4200, 4500, 5200, 6000d,6230d, 6600d, 6700d, ix4000, 5000,pro 9000, 9500.Rev. 04/29/10