Canon PIXMA MP210 Series Setup Instructions

Also see for PIXMA MP210 Series: Supplementary guide Quick start guide Manual Product specifications Quick start guide

Contents

Start HereEasy Setup InstructionsImportantWhen moving the machine, carry the machine at both ends as shown below. Donot lift the machine by grasping the Paper Support Extension.a Place the machine on a flat and horizontal surface, and do notplace any objects in front of the machine.Remove all the shipping tapes and protective material on the outside of themachine.Then open the Paper Output Tray.b Lift the Scanning Unit (Printer Cover), and pull the Scanning UnitSupport down into place.Scanning Unit (Printer Cover)c Remove the protective material on the right side.Protective MaterialCautionBefore turning on the machine, remove all of the shipping tapes.1 Prepare the Machined Lift the Scanning Unit (Printer Cover) slightly to set the ScanningUnit Support back to its original position, and then gently closethe Scanning Unit (Printer Cover).e Plug the power cord in the back of the machine and connect theother end to the wall outlet.Power Cord Document CoverImportantMake sure that the Document Cover is closed.NoteDo NOT connect the USB cable at this stage.f Press the ON/OFF button to turn on the machine. The machinewill initialize. Wait until the Power lamp stops flashing andremains lit green.g Lift the Scanning Unit (Printer Cover), and pull the ScanningUnit Support down into place. The FINE Cartridge Holderautomatically moves to the left.Scanning Unit (Printer Cover)h Write down the serial number located inside the machine. Youwill need this to register your product.Serial Number2 Install the FINE Cartridgesa Remove the Black FINE Cartridge from its box.b Remove the protective tape gently.Protective TapePrint Head NozzlesElectrical ContactsImportantDo not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.The machine may not print out properly if you touch it.Do not reattach the protective tape once you have removed it.Be careful not to stain your hands or surrounding work area with ink on theremoved protective tape.c Insert the Black FINE Cartridge slightly slanted into the left slotB .•••d Push up the FINE Cartridge until it clicks into place.ImportantFor correct machine operation, make sure the FINE Cartridge is securely inserted.Clicke Repeat the procedure for the Color FINE Cartridge, inserting itinto the right slot C .f Lift the Scanning Unit (Printer Cover) slightly to set the ScanningUnit Support back to its original position, and then gently closethe Scanning Unit (Printer Cover).ImportantOnce you have installed the FINE Cartridges, the LED will flash green. Wait untilthe LED stops flashing and displays 1. It takes about one to two minutes.Hardware setup is complete.Photo All-in-OneQ T 5 1 2 0 6 V 0 1Unpack the Machine Please confirm the included items against the illustration printed on the lid of the packing box.A USB cable is necessary to connect the machine with your computer.•• ImportantWhen cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.

/ 2

Related manuals for Canon PIXMA MP210 Series