23Printing Photographs Directly from a Compliant DeviceENGLISHz Confirming or Changing PictBridge Print Settings on the MachineYou can confirm and change the print settings such as media type and size that are preset to themachine and applied to PictBridge printing.z Displaying the PictBridge Settings Screen and Specifying the Settings(1) Turn on the machine.(2) Select Settings on the HOME screen.See “Basic Operation for the Operation Panel” on page 6.(3) Select Device settings, then press the OK button.(4) Select PictBridge settings, then press the OK button.(5) Select the item to set, then press the OK button.(6) Select the item, then press the OK button.(7) Confirm the print settings, select Next and then press the OK button.(8) Repeat steps (5) and (6) to specify the item.(9) After finishing all settings you need, select OK and then press the OK button.z Setting itemsPage sizeSelect the page size, when printing directly from a PictBridge compliant device.Media typeSelect the media type, when printing directly from a PictBridge compliant device.Print qualitySelect the print quality, when printing directly from a PictBridge compliant device.Bordered/BorderlessSelect bordered or borderless print.Photo opt.proActivate/deactivate the Photo Optimizer pro function.Automatically optimizes brightness and tone of a photo.Vivid photoActivate/deactivate Vivid photo function.Makes green and blue more lively.Face brightenerActivate/deactivate Face brightener function.Brightens a darkened face on the photo taken against the light.Noise reductionActivate/deactivate the Noise reduction function.Reduces the noise on blue areas like the sky as well as on black areas.Image optimizerActivate/deactivate Image optimizer function.Corrects and smooths the jagged contours for printing.Red eye correc.Activate/deactivate Red eye correction.Corrects red eyes in portraits caused by flash photography.BrightnessAdjust brightness.
