1 32If the Setup Preparations dialog boxappears, confirm that preparation iscomplete, then click OK.4 51 324 5 63-A3-B Connecting to AirPort NetworksWith Multiple Access PointsEnter the Network Name. (Alsocalled SSID or Service Set Identifierthat you would like the machine tojoin.)Click Manual Setup.Select Use WPA2 from the drop-down menu.If the network uses WPA/WPA2 security,selecting Use WPA will give the sameresults.Confirm the Encryption column tocheck the encryption method beingused.•If the Setup Preparations dialog boxappears, confirm that preparation iscomplete, then click OK.On the Canon IJ Network Toolscreen, select LAN connection,then click OK.Select Setup in the drop-downmenu, select MP620 series inPrinters, then click OK.Connecting to AirPort NetworksWith a Single AirPort Access PointUse These Instructions if Your Network Has Only One AirPort Networking Device(Single Time Capsule, AirPort Extreme, AirPort Express, etc.)On the Canon IJ Network Toolscreen, select LAN connection,then click OK.Select Setup in the drop-downmenu, select MP620 series inPrinters, then click OK.For Users With Multiple Access Points (Wireless Routers) Proceed to Section 3-BWhen the Access Points screenappears, select an access point touse, then click Connect.a. Disconnect the USB cable.b. Click Next.To connect to the access point with WEPor WPA displayed in the Encryptioncolumn, enter the network key (WEP keyor WPA key) in Network Password, thenclick Connect.Use These Instructions if Your Network Has Multiple AirPort Networking Devices(Including Time Capsule, AirPort Extreme, AirPort Express, etc.)For example: Airport Extreme AND Time CapsuleYou can retrieve your networkkey by using the Canon PIXMAWireless Setup Assistant orthe instructions which can bedownloaded from the Canonsupport webpage (www.usa.canon.com/downloadlibrary).If you are unable to retrieve thenetwork key or other settings referto the manual of your accesspoint or router, or contact itsmanufacturer.