Canon PIXMA MP760 User Manual

Also see for PIXMA MP760: Supplementary guide Quick start guide Quick start guide Service manual

Contents

Install the software.Select Easy Install in order to install the application software, electronic manual and MP drivers.Select Custom Install in order to choose the options you would like to install.This sheet explains Easy Install Only.IMPORTANTTemporarily disable any firewall software and close any open applications, including anti-virussoftware. Computer security programs can be re-started after software installation.The following software programs are included on the Setup CD-ROM:IMPORTANT• Do not connect the USB cable until Step 3, “Connect the USB cable.”• You must log on as an administrator or have administrative privileges in order to install the softwarein Windows XP or Windows 2000.• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstallthis version before installing the new version. For instructions on uninstallation, see the guides forthat version of MultiPASS Suite.Step 1: Prepare the Setup CD-ROM and get ready to install.1 Turn ON your computer, and start Windows.2 Insert the Setup CD-ROM (silver) into the CD-ROM drive.• The setup program should automatically run. If the installer in the CD-ROM does not runautomatically, click [Start] and select [My Computer], then double-click the CD-ROM icon.IMPORTANTIf the following screen appears, the USB cable isconnected.z Perform the following steps.1. Disconnect the USB cable.2. Click [Cancel].Step 2: Install the software and follow on screen instructions.When the Registration Sceen appears, follow on screen instructions to register your product. You will needyou product serial number, which is located on the back of the machine.Step 3: Connect the USB cable.• Make sure both your machine and the computer are turned ON.• When you connect the USB cable, the computer will automatically detect and configure any necessarysettings.In Windows 2000, the machine may not be set as the default printer.You now have completed installation of the software.The following software programs are included on the Setup CD-ROM:IMPORTANTDo not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are notsupported.Step 1: Connect the USB cable.• Make sure the machine is turned ON.Step 2: Prepare the Setup CD-ROM.1 Turn ON your computer, and start Mac OS X.2 Insert the Setup CD-ROM (white) into the CD-ROM drive.• The setup program should automatically run. If the setup program does not automatically run, double-click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD-ROM and click [File] menu andthen select [Open].Step 3: Enter the name and password for an AdministratorAccount.1 Enter the name for Administrator.2 Enter the password and then click [OK].Step 4: Install the software and follow on screen instructions.* When connecting from Mac OS X v.10.3.3 or earlier:Restarting the computer while connected to the machine may cause the machine not to be detected. Toresolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then backON again.When the Registration Sceen appears, follow on screen instructions to register your product. You will needyou product serial number, which is located on the back of the machine.z Perform the following to make sure the driver has been installed correctly.1. Double-click the Macintosh HD icon where you installed the MP Drivers, then double-clickthe [Applications] folder.2. Double-click the [Utilities] folder, then double-click the [Printer Setup Utility] ([Print Center]when using Mac OS X v.10.2.x) icon.If the printer is displayed in the [Printer List],the printer driver is installed.If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select[USB] from the pop-up menu. Select [MP760] from the [Product] list and click [Add].You now have completed installation of the software.On-screen Manual MP Drivers MP NavigatorEasy-PhotoPrint Easy-WebPrint ScanSoft OmniPage SEArcSoft PhotoStudio1 Click [Easy Install], then click [Install].• To read descriptions of the software programs, click the icon.• To read restrictions of the software programs, click the icon.2 Click [Yes].• Installation begins. Follow the on-screeninstructions to install the software.3 Click [Continue].• Follow the displayed instructions.4 Click [Exit].• If prompted to, restart your computer.ClickClickClickClick ClickClickOn-screen Manual MP Drivers MP NavigatorEasy-PhotoPrint ScanSoft OmniPage SE ArcSoft PhotoStudio1 Click [Easy Install], then click [Install].• To read descriptions of the software programs, click the icon.• To read restrictions of the software programs, click the icon.2 Click [Yes].• Installation begins. Follow the on-screeninstructions to install the software.3 Click [Continue].• Follow the displayed instructions.4 Click [Restart] to restart yourcomputer.Enter ClickClickClickClick ClickClick

/ 2

Related manuals for Canon PIXMA MP760