Canon PIXMA MX300 Quick Start Manual

Also see for PIXMA MX300: Supplementary guide Brochure & specs Manual Install guide Quick start guide

Contents

4 Preparing the MachineENGLISHPreparing the MachineBe sure to read your setup sheet first for setting up your machine and getting it ready for use.Unpack the machinePlease confirm the included items against the illustration printed on the lid of the packing box.1 Connect the telephone line and the power cord.Be sure to use the bundled telephone line cable.If you connect the telephone line, see “Methods of Connecting External Devices” on page 25.Remove the Telephone connector cap to connect the external device.Users in the UKIf the connector of the external device cannot be connected to the jack on the machine,you will need to purchase a B.T. adapter to connect as follows:Connect the external device line to the B.T. adapter, then connect the B.T. adapter to thejack.2 Turn on the machine.3 Prepare the FINE Cartridges.ImportantA USB cable is necessary to connect the machine with your computer.CautionBe sure to remove the tapes and protective material before you turn on the machine.NoteThe tape or the protective material position is subject to change.Notez If an unintended language is displayed on the LCD, press the Back button to return to theLANGUAGE SETTING screen.z The country selection is only available for some countries.Cautionz Do not touch internal parts other than the FINE Cartridge Holder.z Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain yourclothes and hands.Importantz If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE CartridgeHolder moves to the right side. Close and reopen the Scanning Unit (Printer Cover) to return theholder to the left.z Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The machinemay not print out properly if you touch it.z Do not reattach the protective tape once it has been removed.z Handle the removed protective tape carefully to avoid getting your hands dirty or stainingsurrounding work area.