Step ThreeOn the next screen click InstallStep FourSelect Use the printer with wireless LAN connection, then click Next.10Installing the Drivers and Software <<Previous Next>>

adding your multifunction to your network

installing the drivers and software

Canon PIXMA MX420 Network Installation Manual

PIXMA MX420 Series

Navigation tips for macintosh users

Preparing to Connect My Multifunction to My Network

Important Information You Need Before Adding Your Multifunction

Adding Your Multifunction to Your Network

Installing the Drivers & Software

Registering the Printer & Scanner

getting started

machine installation

getting help from canon

Problems during Network Setup

Access point was not detected. is Displayed

Multiple access points with the same name exist. is Displayed

The directly entered access point was not detected. is Displayed

The device may not be able to connect to the network is Displayed

Problems during Software Installation

Check Printer Settings dialog box is Displayed

Other Troubleshooting Tips

Entering the Access Point's Wireless LAN Settings Directly on the Machine

Specifying the Machine's IP Address (IPv4 only)

Connection Checklist

wireless connection

receiving a fax


Contents adding your multifunction to your network installing the drivers and software	Step ThreeOn the next screen click InstallStep FourSelect Use the printer with wireless LAN connection, then click Next.10Installing the Drivers and Software < Next>> Previous Next / 14