Canon PIXMA MX712 Setup Manual

Also see for PIXMA MX712: Specification Getting started guide Fax setup Connection guide Guía de configuración

Contents

Wired Connectiona Preparation for ConnectionBefore Starting Wired Connection Setup1. Make sure that the printer is turned on.If the power is on, the lamp on one of the mode buttons (A) will be lit.Notes on Wired ConnectionMake sure that the computer and router (A) (or access point) are connected.The confi guration, router functions, setup procedures and security settings of the network device vary depending on yoursystem environment. For details, refer to the manual of your network device or contact its manufacturer.For offi ce use, consult your network administrator.Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosingdata such as your personal information to a third party.This printer cannot be used over wireless and wired connections at the same time.When using a router, connect the printer and computer to the LAN side (same network segment).b Cable ConnectionYou will need an Ethernet cable (sold separately).1. Remove the Cap (A) of the upper port located on the right side at the back of the printer.2. Connect the printer and a network device (router, etc.) with an Ethernet cable (A).••••••