Canon PIXMA MX860 Getting Started

Also see for PIXMA MX860 series: Supplementary guide On-screen manual Manual Manual Service manual

Contents

DWindows MacintoshWhen the Access Points screen appears, select an access point touse, then click Connect.If the following screen appearsWhen an access point is detected automatically, the Access Points screendoes not appear.If you want to select an access point manually, or if the target access pointis not displayed in the list, or if an error message appears, refer to "5 Thefollowing screen is displayed during setup" in the printed manual: NetworkSetup Troubleshooting.•To connect to the access point with WEP, WPA or WPA2 displayed in theEncryption column, enter the network password, then click Connect. Fordetails on network passwords, refer to "3.1 About Network Key (Windows)/Network Password (Macintosh)" in the printed manual: Network SetupTroubleshooting.•If the following screen appearsWhen the Set Printer IP Address screen appears, click Connect.If no connection is established even after Connect is clicked, refer to "5.6 TheSet Printer IP Address screen is displayed during setup" in the printed manual:Network Setup Troubleshooting.•If the machine is detected automatically, the Set Printer IP Address screendoes not appear.