Canon PIXMA MX882 Network Setup Manual

Also see for PIXMA MX882 Series: Manual Installation guide Getting started Network Setup Network Setup

Contents

810911-A4132Enter the access point name/network name (SSID),then press the left FUNCTION button.For details on how to check the access point name/network name (SSID), refer to the manualsupplied with the access point or contact its manufacturer.•Enter the same access point name/network name (SSID) asthat of the access point on the machine.•Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.•Go to either of the following steps according to theselected security protocol.•DisableWEPWPA/WPA2Go to .Go to on page 13.Go to onpage 13.Select a security protocol for the access point, thenpress the OK button.When WEP 40 bit or WEP 128 bit is selected in AirPort Utility (AirPort Admin Utility),select WEP.•When WEP (Transitional Security Network) is selected in AirPort Utility, select WPA2-PSK (AES).•For details on how to enter characters, refer to "CharacterEntry" on page 10.Make sure that the access point name/network name(SSID) is correct, then press the left FUNCTIONbutton.2-byte characters are not available for entering the access point name/network name (SSID).•When the access point is set to operate in IEEE802.11n, TKIP cannot be used. Changethe encryption type to something other than TKIP or change the standard to somethingother than IEEE802.11n, then configure wireless LAN settings again.•WEPWPA/WPA2Make sure that the network key is correct, thenpress the left FUNCTION button.Go to on page 13.Enter the network key, then press the leftFUNCTION button.Enter upper and lower case letters of the alphabetcorrectly. Letters are case sensitive.•Select the WEP key number you want to use,then press the OK button.When using AirPort, select WEP key 1 in thescreen. Selecting other key numbers will disablethe connection between the machine and AirPort.•DisablePress the OK button.(P.13)(P.13)When the access point is set to operate in IEEE802.11n and IEEE802.11g with TKIP setas an encryption standard, communication is established using IEEE802.11g.•