Canon Pixma IP2870S Online Manual

Also see for IP2800 series: Manual Online manual Online manual Getting started Online manual

Print "Cut/Paste" lines in marginsSpecifies whether to print cut lines that serve as guidelines for pasting together the pages into aposter.Check this check box to print the cut lines.Print page rangeSpecifies the printing range. Select All under normal circumstances.Select Pages to specify a specific page or range.Note• If some of the pages have not been printed well, specify the pages that do not need to be printedby clicking them in the settings preview of the Page Setup tab. Only the pages shown on thescreen will be printed this time.Booklet Printing dialog boxThis dialog box allows you to set how to bind the document as a booklet. Printing only on one side andprinting a page border, can also be set in this dialog box.The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.Preview IconShows the settings made on the Booklet Printing dialog box.You can check what the document will look like when printed as a booklet.Margin for staplingSpecifies which side of the booklet is to be stapled.Insert blank pageSelects whether to print the document on one side or both sides of the booklet.Check this check box to print the document on one side of the booklet and select the side to be leftblank from the list.MarginSpecifies the width of the stapling margin.The specified width becomes the stapling margin from the center of the sheet.Page BorderPrints a page border line around each document page.Check this check box to print the page border line.Specify Margin dialog boxThis dialog box allows you to specify the margin width for the side to be stapled. If a document does not fiton one page, the document is reduced when printed.MarginSpecifies the width of the stapling margin.The width of the side specified by Stapling Side becomes the stapling margin.Print Options dialog boxMakes changes to print data that is sent to the printer.Depending on the type of printer driver you are using and the environment, this function may not beavailable.200