Canon Pixma iP5200 Quick Start Manual

Also see for Pixma iP5200 Series: Supplementary guide Service manual Brochure & specs Service manual Quick start guide

Contents

20Replacing an Ink TankWhen the printer runs out of ink, replace the empty ink tank with a new one. Specify the following ink tankswhen purchasing.If the Top Cover is opened more than ten minutes, the Print Head Holder moves to the right side. If thisoccurs, close the Top Cover, and open it again.1 Open the Paper Output Tray and TopCover, and then pull down the InnerCover.Push the Open Button above the Paper Output Tray. ThePaper Output Tray automatically opens.2 Remove the empty ink tank.Do not touch the Print Head Lock Lever.3 Install the new ink tank. Press themark on the ink tank until it clicks intoplace and then its red lamp lights.4 Put back the Inner Cover and close theTop Cover when finished.Black : CLI-8BK Black : PGI-5BKYellow : CLI-8Y Magenta : CLI-8M Cyan : CLI-8CEnsure that all the ink tanks are installed in the orderdirected by the label. The printer cannot be usedunless all ink tanks are installed.The ALARM lamp flashes orange if an ink tank isnot installed properly. Open the Top Cover andmake sure that all the ink tanks are installed in thecorrect order directed on the label.Print Head Lock Lever

/ 24

Related manuals for Canon Pixma iP5200 Series