If a message with the format "Error No.: n" is displayed:Error No.: 300Ensure that the printer is turned on, and that the printer and the computer are securely connected. If theproblem remains, verify the Printer Setup Utility (or Print Center) setting. If you are using an OS other thanMac OS X v.10.3, start Print Center and verify the setting.(1) Open the Printer Setup Utility (or Print Center ).See Printer Setup Utility (or Print Center)(2) Ensure that the iP90 is displayed in the Printer List.Error No.:1700The printer has a built-in waste ink absorber* to hold the ink used during Print Head cleaning. Eight flashesindicates that this absorber is nearly full.Press the RESUME/CANCEL button to clear the error so you can continue printing. Before the waste inkabsorber becomes completely full, contact a Canon service representative.*The waste ink absorber absorbs ink used during cleaning, for example. When you experience this error, youwill need to call for servicing to replace the waste ink absorber and to check the printer for proper operation.Error No.:2001Disconnect the camera cable, press the RESUME/CANCEL button to the printer and reconnect the cable.If the error is still unresolved, the digital camera or digital video camcorder that is not supported by thisprinter. Use a digital camera or digital video camcorder compatible with this printer.
