Before UseBasic GuideAdvanced GuideCamera BasicsUsing GPSFunctionsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndex17Before UseBasic GuideAdvanced GuideCamera BasicsUsing GPSFunctionsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndex• Date/time settings can be retained for about 3 weeks by the camera’s built-indate/time battery (backup battery) after the battery pack is removed.• The date/time battery will be charged in about 4 hours once you insert acharged battery pack or connect the camera to an AC adapter kit (soldseparately, =114), even if the camera is left off.• Once the date/time battery is depleted, the [Date/Time] screen will bedisplayed when you turn the camera on. Set the correct date and time asdescribed in “Setting the Date and Time” (=15).• Automatic date and time updating is possible using GPS (=33).Display LanguageChange the display language as needed.1 Enter Playback mode.zz Press the <1> button.2 Access the setting screen.zz Press and hold the <m> button, andthen immediately press the <n>button.3 Set the display language.zz Press the <o><p><q><r> buttons tochoose a language, and then press the<m> button.zz Once the display language has been set,the setting screen is no longer displayed.• The current time is displayed if you wait too long in step 2 after pressing the<m> button before you press the <n> button. In this case, press the<m> button to dismiss the time display and repeat step 2.• You can also change the display language by pressing the <n> buttonand choosing [Language ] on the [3] tab.
