83Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexStill Images MoviesUsing Optional AccessoriesStill Images MoviesPlayback on a TVConnecting the camera to a TV with the AV Cable AVC-DC400 (soldseparately) enables you to view your shots on the larger screen of the TVas you control the camera.For details on connection or how to switch inputs, refer to the TV manual.• Some information may not be displayed on the TV (=103).1 Make sure the camera and TVare off.2 Connect the camera to the TV.z On the TV, insert the cable plugs fully intothe video inputs as shown.z On the camera, open the terminal coverand insert the cable plug fully into thecamera terminal.Black or whiteYellowYellowBlack3 Turn the TV on and switch tovideo input.z Switch the TV input to the video input youconnected the cable to in step 2.4 Turn the camera on.z Press the <1> button to turn the cameraon.z Images from the camera are nowdisplayed on the TV. (Nothing isdisplayed on the camera screen.)z When finished, turn off the camera andTV before disconnecting the cable.• Correct display is not possible unless the camera video outputformat (NTSC or PAL) matches the TV format. To change thevideo output format, press the <n> button and choose [VideoSystem] on the [3] tab.
