4013456789Preliminary Notes andLegal InformationContents: BasicOperationsCamera BasicsOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeCoverAdvanced Guide2 Auto Mode/HybridAuto ModeStill Images MoviesCustomizing the Self-TimerYou can specify the delay (0 – 30 seconds) and number of shots (1 – 10).1 Choose [$].zz Following step 1 in “Using the Self-Timer”(=39), choose [$] and press the<n> button.2 Configure the setting.zz Press the <o><p> buttons to choose[Delay] or [Shots].zz Press the <q><r> buttons to choose avalue, and then press the <m> button.XX Once the setting is complete, [$] isdisplayed.zz Follow step 2 in “Using the Self-Timer”(=39) to shoot.• For movies shot using the self-timer, [Delay] represents the delaybefore recording begins, but the [Shots] setting has no effect.• When you specify multiple shots, image brightness and white balance aredetermined by the first shot. More time is required between shots when theflash fires or when you have specified to take many shots. Shooting will stopautomatically when the memory card becomes full.• When a delay longer than two seconds is specified, two seconds before theshot, the lamp blinking and self-timer sound will speed up. (The lamp willremain lit in case the flash fires.)Still ImagesDeactivating the FlashPrepare the camera for shooting without the flash as follows.Configure the setting.zz Press the <r> button, press the <q><r>buttons to choose [!], and then pressthe <m> button.XX Once the setting is complete, [!] isdisplayed.zz To restore the original setting, repeat thisprocess but choose [ ].• If a flashing [ ] icon is displayed when you press the shutter buttonhalfway in low-light conditions, mount the camera on a tripod or takeother measures to keep it still.COPY
