Printing with Bubble Jet Printer (Optional) 123PrintingAn image can be printed when displayed in single replay or selected in index replay.1 Choose an image using B or A on the multicontroller andpress .2 Set the number of prints, the print style and cropping settingsas required.• Selecting the number of copies (p. 124)• Setting the Print Style (p. 124)• Trimming (Printing a Portion of an image) (p. 126)3 Choose [Print] using B or A on themulticontroller and press .• You can also select [Print] by pressing thebutton.• The image starts printing and, when it iscompletely finished, the display reverts tostandard replay mode.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• You cannot print movies or images recorded in the RAW format.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Cancel Printing• To cancel printing between images, press . A confirmation dialog appears.Select [OK] using B or A on the multicontroller and press .The printing stops even if it is incomplete and the paper is fed through.• A print in progress cannot be stopped. Wait until the current image is printed andthen cancel before the next one starts. The display reverts to standard replaymode.Printing Errors• An error message will appear if an error occurs for some reason during theprinting process (p. 150). The printing resumes automatically after you correct theerror. If the error persists, press and stop printing.• The [Continue] and [Stop] options may appear with some error messages.• The error number is displayed on the operation panel of Bubble Jet Printer. Pleaserefer to the Bubble Jet Printer Quick Start Guide for the remedies corresponding tothe error numbers.
