Canon PowerShot S400 Service Manual

Also see for DIGITAL IXUS 400: Software starter guide User guide User guide Parts catalog Quick start guide

Contents

Canon PowerShot S400 Service Manual Manual pdf 75 page image

3-28CHAPTER 3. REPAIR INSTRUCTION3.3.5 Starting up the Adjustment SoftwareAfter completing the preparatory steps, click Start and move the cursor to Program; then select CanonDigital Camera and click PowerShot S400/DIGITAL IXUS 400 Adjustment.3.3.6 Menu WindowWhen the Adjustment Software starts up, the Menu Window below will appear.3.3.7 How to Use the Adjustment Software Mode changeThis camera uses normally PTP for communication with PC. Because calibration and adjustmentbecome impossible depending on the condition of PTP, select the TWAIN mode of the PTP beforestarting calibration and adjustment.• “FA Mode” button: This button is used to change the mode from the USER mode to the FA mode.(PTP to TWAIN)* Before starting calibration and adjustment, be sure to set the FA mode.• “USER Mode” button: This button is used to change the mode from the FA mode to the USERmode. (TWAIN to PTP)* When calibration and adjustment are completed, be sure to change the mode to the USER modebefore quitting the software. Calibration/AdjustmentFor starting, click the button related with calibration/adjustment.* Whenever you use your light source for the adjustment for the first time, be sure to click the “Cali-bration” Button. Quitting the Adjustment SoftwareClick the “Exit” button. Saving or Loading data• “Save” button : This button saves all adjustment data stored on the camera in text format.• “Load” button : This button loads all adjustment data saved in text format to the camera. Notes• If the adjustment fails, a message indicating the failure will appear on each product. If this happens,do the adjustment again.• The Adjustment Software is dedicated only to Canon Digital Camera PowerShot S400/DIGITALIXUS 400.Never use it for any other camera.• The Windows2000 or 98 must be pre-installed on the computer that is equipped with the USBterminal.* Operations on the other Operating Systems such as Windows95, Windows XP and others are notguaranteed. (Because Windows95 does not support USB.)