70You can check whether the image is in focus right after it is recorded.To Cancel Checking the FocusPress the shutter button halfway.Checking for Focus Right After Shooting1 Shoot.zThe recorded image displays for about 2 seconds (or theinterval set with the Review function p. 24).2 Press (or ) while theimage is displayed.zThe number of times the DISP. but-ton is pressed depends upon thedisplay settings for the LCD monitor(See below). Press the DISP. buttonrepeatedly until the screen at theright appears.zDisplays as follows.- Camera is focused: the AF frames are displayed in therecorded image in white and the frame that is in focus hasan orange frame within it.- Camera is not focused: an orange frame appears at thecentre of the recorded image.- Contents of the orange frame can be confirmed at the bot-tom right, you can change the display magnification of thearea within the orange frame with the zoom lever.zYou can switch between orange frames and change the dis-play position (p. 71) using the MENU button or the FUNC./SET button.z You can delete an image by pressing the button whilethe image is displayed, except in the display positionchange mode (See Basic Guide, p. 20).z Pressing the DISP. button will change the display on theLCD monitor as follows.Focus Confirmation Î Detailed Î No InformationRecorded ImageOrange frame contents
