90You can set the shutter to the speed at which you want to shoot. The camerawill set the appropriate aperture value for the shutter speed you set.M stands for “Time value”.Set the mode dial to M.Make the setting. Turn the  dial to set the shutter speed.Shoot.Available Shutter Speeds• 2" indicates 2 seconds, 0"3 indicates 0.3 second and 1/160 indicates 1/160 second.• The fastest shutter speed when using the flash is 1/2000 second. The cameraautomatically resets the shutter speed to less than 1/2000 second if a fastershutter speed is chosen. However, if [Safety FE] is set to [Off] (p. 95), the fastestshutter speed is 1/500 second.• In addition, when the flash fires, the camera may automatically adjust he currentshutter speed to the optimum speed for the shooting conditions.• Depending on the zoom position, some shutter speeds may not be available.Setting the Shutter Speed15", 13", 10", 8", 6", 5", 4", 3"2, 2"5, 2", 1"6, 1"3, 1", 0"8, 0"6, 0"5, 0"4, 0"3, 1/4, 1/5, 1/6, 1/8,1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,1/320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/2500, 1/3200• When shutter speeds of 1.3 seconds or slower are used, images areprocessed to eliminate noise after being taken. A certain amount ofprocessing time may be needed before you can take the next shot.• You should set the [IS Mode] to [Off] when lowering he shutter speedand shoot with a tripod (p. 152).If the aperture value appears in orange when the shutter button is pressedhalfway, he scene has exceeded the correct exposure limits. Adjust the shutterspeed until the aperture value appears in white. Safety Shift can also be used(p. 91).What if the aperture value appears in orange?
