29In Easy mode, operational instructions are displayed on the screen, and thecamera is set so that only the buttons, the zoom lever and the movie button(p. 30) explained on this page are functional. This prevents incorrectoperation of the camera, allowing even beginners to take and view worry-freepictures.Shootingz Set the mode dial to 9.z Follow Steps 3 – 5 on pp. 24 – 25 to shoot(no sound will play).z Press the r button to turn off the flash. !will appear on the screen. Pressing the rbutton again turns on the flash andappears on the screen. The flash willautomatically fire in low light conditions.Viewingz Press the 1 button, then press the qrbuttons or turn the  dial to switchimages.z Press the 1 button, then press the mbutton, and all the shots you have takenwill display for about 3 seconds each.Press the m button again to stop theslideshow.z To erase an image, choose the image toerase and press the p button. Press the qrbuttons or turn the  dial to choose [Erase],then press the m button.Shooting or Viewing Images in Easy ModeSince the flash will not fire when lowered, you cannot change settings evenif you press the r button. To set the flash to , first raise it manually, thenpress the r button to change the setting.COPY
