100Just like with Exposure Compensation (p. 73), you can adjust the exposure±2 stops in 1/3-stop increments when using the flash.Choose ~.● After pressing the m button, press theop buttons to choose ~.Make the setting.● Press the qr buttons or turn the  dial tochoose the amount of flash exposurecompensation, then press the m button.X Once set, ~ will appear on the screen.In D mode, you can choose 3 levels of flash output.Set the mode dial to D.Choose Flash Output.● After pressing the m button, press theop buttons to choose ~.Adjusting the Flash Exposure CompensationSafety FEThe camera automatically changes the shutter speed or aperture value when theflash fires to avoid overexposing and blowing out the highlights in the scene.However, if you press the n button to display the 4 tab and set [Safety FE]to [Off] in [Flash Settings], the shutter speed and aperture value will notautomatically adjust.• You can also set the flash exposure compensation. Press the nbutton and choose [Flash Control] (p. 98) from the 4 tab. Then choose[Flash Exp. Comp] and press the qr buttons to choose a setting.• When you press and hold the h button for 1 sec. or more, or with theflash raised, if you press the h button and immediately press the nbutton, the settings screen will appear.Adjusting the Flash OutputCOPY
