Canon PowerShot SX420 IS User Manual

Also see for PowerShot SX420 IS: Getting started

Contents

Canon PowerShot SX420 IS User Manual Manual pdf 77 page image

77Before UseBasic GuideAdvanced Guide1 Camera Basics2 Auto Mode3 Other Shooting Modes5 Playback Mode6 Wi-Fi Functions7 Setting Menu8 Accessories4 P Mode9 AppendixIndex3 Review the edited movie.● Press the [ ][ ] buttons to choose [ ],and then press the [ ] button. The editedmovie is now played.● To edit the movie again, repeat step 2.● To cancel editing, press the [ ][ ]buttons to choose [ ]. Press the [ ]button, press the [ ][ ] buttons to choose[OK], and then press the [ ] buttonagain.4 Save the edited movie.● Press the [ ][ ] buttons to choose [ ],and then press the [ ] button.● Press the [ ][ ][ ][ ] buttons to choose[New File], and then press the [ ] button.● The movie is now saved as a new file.● To overwrite the original movie with the cut one, choose[Overwrite] in step 4. In this case, the original movie will beerased.● If the memory card lacks sufficient space, only [Overwrite] will beavailable.● Movies may not be saved if the battery pack runs out while savingis in progress.● When editing movies, you should use a fully charged batterypack.Editing MoviesStill Images MoviesYou can remove unneeded portions from the beginning and end ofmovies.1 Choose [ ].● Following steps 1 – 5 in “Viewing”(= 61), choose [ ] and press the [ ]button.● The movie editing panel and editing barare now displayed.2 Specify portions to cut.● (1) is the movie editing panel, and (2) isthe editing bar.● Press the [ ][ ] buttons to choose [ ]or [ ].● To view the portions you can cut(identified by [ ] on the screen), pressthe [ ][ ] buttons to move [ ]. Cut thebeginning of the movie (from [ ]) bychoosing [ ], and cut the end of themovie by choosing [ ].● If you move [ ] to a position other than a[ ] mark, in [ ] the portion before thenearest [ ] mark on the left will be cut,while in [ ] the portion after the nearest[ ] mark on the right will be cut.(1)(2)