Canon Powershot SD430 Digital ELPH Wireless User Manual

Also see for Digital ELPH: Owner's manual User guide User guide Instruction manual Advanced user's guide

Contents

Canon Powershot SD430 Digital ELPH Wireless User Manual Manual pdf 5 page image

5z Received images will be stored at the end of all image files.The wireless connection can be terminated by the following steps.z Ending from (Wireless) Menu (See below).z Turn off the power or switch over to Shooting ModeEnd with (Wireless) Menu3 Select [Transfer] and press .z If you have not selected the images for transfer order in advance,specify the images with [Order] or [Mark all] and select [Transfer].z Transfer of images will begin. The wireless lamp and thebutton will blink blue.z The transferring camera will display [Transferring] and the receivingcamera will display [Receiving]. When the transfer is complete, [Transfer completed] and[File(s) received] will display.z If you wish to cancel the operation while transferring, press the FUNC./SET button while[Transferring] is displayed on the screen.z If you have failed to receive, [File(s) not received] will be displayed. Press the FUNC./SETbutton, and the screen will return to the previous screen.z It is not possible to transfer movies or sound memos.z Two cameras cannot transfer images at the same time (If one is transferring, the othercamera may only receive).z The camera receiving the images cannot cancel while receiving.Ending the Wireless Connection1 (Wireless) Menu [Connect/Disconnect]2 Make sure the name of the camera is displayed as [Target Device],then select [Disconnect] and press .z The wireless connection will end and [Disconnected] will appearon the target camera screen. Press the FUNC./SET button andthe Playback screen will appear.

/ 7

Related manuals for Canon Digital ELPH