2 Adjusting the Color Tone for the Light SourceN120With just one shot, three images having a different color balance can berecorded simultaneously. Based on the color temperature of the current whitebalance setting, the image will be bracketed with a blue/amber bias ormagenta/green bias. This is called white balance bracketing (WB-BKT). Whitebalance bracketing is possible up to ±3 levels in single-level increments.Set the white balance bracketing amount.In step 2 for white balance correction,when you turn the <6> dial, the “ ”mark on the screen will change to “ ”(3 points). Turning the dial to the right setsthe B/A bracketing, and turning it to theleft sets the M/G bracketing.X On the right, “Bracket” indicates thebracketing direction and correction amount.Pressing the <C> button will cancelall the [WB Shift/BKT] settings.Press <0> to exit the setting andreturn to the menu.Bracketing SequenceThe images will be bracketed in the following sequence: 1. Standardwhite balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standardwhite balance, 2. Magenta (M) bias, and 3. Green (G) bias.White Balance Auto BracketingB/A bias ±3 levelsDuring WB bracketing, the maximum burst for continuous shooting will be lower andthe number of possible shots will also decrease to one-third the normal number.You can also set white balance correction and AEB (p.105) together withwhite balance bracketing. If you set AEB in combination with white balancebracketing, a total of nine images will be recorded for a single shot.Since three images are recorded for one shot, the card will take longer torecord the shot.“BKT” stands for Bracketing.COPY
