Canon SELPHY ES30 Beginner's Manual

Also see for SELPHY ES30: Software guide Software guide Software user's guide Software user's guide User guide

Contents

Canon SELPHY ES30 Beginner's Manual Manual pdf 20 page image

20Error MessagesIf any error occurs during printing, a message is displayed on the LCD monitor of the printer. If aproblem occurs while the printer is connected to the camera, the camera’s LCD monitor may displayan error message.No paper/inkCheck that the cartridge is correctly installed.•Change the cartridge to a new one.•If paper is not feeding correctly, remove the cartridge, and manually remove anypaper remaining in the printer.•Paper jam!Press to eject the paper. If the paper is not ejected, turn the power off andturn it on again. If the printer fails to eject the paper, contact a Canon CustomerSupport center for assistance.•Ink ErrorRemove the cartridge from the printer, take up the slack in the ink sheet, andthen reload the cartridge. If the cartridge is stuck in the printer, contact a CanonCustomer Support center for assistance.•Cannot print! / Could not print xx imagesThe following images cannot be printed.An image with a data size that is too big. Images larger than 8000 × 8000 pixels cannotbe printedAn image that is corruptedAn image other than JPEG•–––When you wish to print an image with the printer connected to the camera, checkif the size of the image matches the recording pixels of the image in the camera. Ifthe size is not appropriate, resize the image and convert it as necessary to a JPEGimage that the camera can display.•Limit the size of image files to less than 8000 × 8000 pixels.•This printer supports image data conforming to the Design rule for Camera Filesystem.•No Image.Check whether there are images recorded on the memory card.•COPY