Canon Selphy CP510 User Manual

Also see for Selphy CP510: Software guide Software guide Supplementary guide User guide Printer Software guide

Contents

Canon Selphy CP510 User Manual Manual pdf 63 page image

61Error MessagesThe power button of the printer lights or blinks red if any error occurs during printing. If aproblem occurs while the printer is connected to the camera, the camera’s LCD monitormay display an error message.On the CP710:A screen indicating the error type is displayed also on the printer’s LCD monitor. See thecorresponding solution.On the CP510:Check the camera’s LCD monitor, and see the corresponding solution.CP710’sLCD Monitor Camera’s LCD MonitorNo paperz Check that the paper cassette is correctly installed.z Make sure that the paper cassette contains paper.z If paper is not feeding correctly, remove the paper cassette, and manuallyremove any paper remaining in the printer.Incompatible paper sizez Wrong paper size is loaded in the paper cassette. Use the designatedpaper size.Paper Jamz Turn the power off and turn it on again. If the printer fails to eject the paper,contact a Canon Customer Support help desk for assistance.No DisplayPaper has been changedz Paper was changed after the print menu was displayed. Change back tothe original paper size or change the print settings.No Inkz Load an ink cassette if it is not in the printer.z If the ink cassette is out of ink, load a new ink cassette.Paper and ink do not matchz Check the ink/paper sets, and use the right ink/paper set.Ink error or Ink cassette errorz Remove the ink cassette from the printer, take up the slack in the ink sheet,and then reload the cassette. If this does not solve the problem, replacewith a new ink cassette. If the ink cassette is stuck in the printer, contact aCanon Customer Support help desk for assistance.