Canon Speedlite 580EX II Instruction Manual

Also see for 580EX - Speedlite II - Hot-shoe clip-on Flash: Service manual Instruction manual Instruction manual Quick guide Manual

Contents

15You can take three flash shots while automatically changing the flashoutput for each shot up to ±3 stops in 1/3-stop increments (1/2-stopincrements if the camera enables only 1/2-stop increments). This iscalled FEB (Flash Exposure Bracketing).1 Select <g>.Press the <8> button so that <g>is displayed.X The <g> icon and bracketingamount will blink.2 Set the flash exposure bracketingamount.Turn the <9> dial to set the amount.3 Press the <8> button.X FEB will be set.You can prevent the FEB from being cancelled automatically after thethree shots are taken. (C.Fn-03 → p.27)The FEB shooting sequence can be changed. (C.Fn-04 → p.27)g FEBAfter the three shots are taken, FEB will be cancelled automatically.For FEB, set the camera’s drive mode to single shooting. Be sure theflash is ready before shooting.You can also combine FEB with flash exposure compensation and FElock.COPY