Canon TR7600 Series Online Manual

Also see for Pixma TR7600 Series: Getting started Getting started Online manual Getting started Getting started

It may take a while for the network device to become ready for use once they are turned on.Proceed once the network devices such as router are ready for use.2. Check if the printer is turned onIf printer is not turned on, turn on the power. If the printer is on, turn them off and on again.Proceed once you complete checking the power status above.2. Check PC network connectionCan you view any web pages on your computer? Make sure the computer and network device (wireless router, etc.) are configured and thecomputer is connected to the network.If you cannot view web pages on your computer, check wireless router network connection settings, such as IP address filtering, MAC addressfiltering, and DHCP function.For more on checking the settings of the wireless router, refer to the instruction manual supplied with the wireless router or contact themanufacturer.Important• Depending on the wireless router, note that different network name (SSID) is assigned for a bandwidth (2.4 GHz or 5 GHz) or its usage (forPC or game machine), using alphanumeric characters at the end of network name (SSID).Once you complete checking the wireless router, configure the network settings for your computer. For the procedures, refer to the instructionmanual supplied with the computer, or contact the manufacturer.Once you complete setting up the wireless router and your computer, configure the settings on your computer in order to view web pages, using theinformation of the wireless router.Proceed once you complete checking the network connection above.3. Check printer's Wi-Fi settingsMake sure the or icon is displayed on the touch screen.If icon is not displayed:The printer is not set to use Wi-Fi. Turn on wireless communication on the printer.If icon is displayed:icon indicates that the wireless router and the printer are not connected. Reconsider the locations of the wireless router and the printer.• Checking the location of wireless router:After checking the wireless router setting, make sure the printer is not placed too far away from the wireless router. The printer can be up 50m (164 ft.) from the wireless router indoors if unobstructed. The printer is designed for indoor use. Make sure the printer is close enough to thewireless router to be used.Place the printer and wireless router where there are no obstacles between them. Wireless communication between different rooms or floorsis generally poor. Wireless communication can be impeded by building materials containing metal or concrete. If the printer cannotcommunicate with the computer over a Wi-Fi due to a wall, place the printer and the computer in the same room.In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router is nearby, it maycause interference. Place the wireless router as far away from interference sources as possible.• Checking the location of printer:323