Canon VB-S910F Installation Manual

Also see for VB-S900F MkII: Operation manual Operating guide Installation guide Installation guide

Contents

Installing the Camera1Weight: Approx. 180 g (6.4 oz.)(camera only)aba. Mounting poleb. Mounting screw holeExample installationsUsing a ceilingmounting pole Using a wall mounting pole2dcLED: When powered on, during reboot,during normal use: When [Turn Off] is selected(please refer to the “Operation Guide”)Please refer to thereverse side of thisguide for details.c. LAN cable d. LED3Set the camera anglePlease manually adjust the camera angle while checking thevideo on a computer (please refer to the “Operation Guide”).Part NamesSerial_ _ _ _ _ _ _MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _1321. Mounting Screw Hole (a 1/4-20 UNC mounting screw less than5.5 mm (0.22 in.) in length will fit the screw hole)2. Microphones3. LensThe contents of this guide are subject to change without any priornotice.45678945610894. Memory card slot cover5. 100Base-TX LAN connector6. External device I/O terminal7. Audio output terminal8. Reset switch (please refer to the “Operation Guide”)9. LED10. Audio input terminalExternal Dimensions69.9 (2.75)16.0 (0.63)54 (2.13)117 (4.61)11.4 (0.45)13.6 (0.54)Unit: mm (in.)32 (1.26)*1*1 tripod screw holes54 (2.13)13.6 (0.54)32 (1.26) 114 (4.49)67 (2.64)11.4 (0.45)Unit : mm (in.)If Using a Memory Cardee. Memory Card SlotTo remove the memory card, push it in all the way until the cardslightly pops out and remove.ImportantInsert a memory card before installing the camera.Only for European Union and EEA (Norway,Iceland and Liechtenstein)These symbols indicate that thisproduct is not to be disposed of withyour household waste, according to theWEEE Directive (2012/19/EU), the BatteryDirective (2006/66/EC) and/or nationallegislation implementing those Directives.If a chemical symbol is printed beneath the symbol shownabove, in accordance with the Battery Directive, this indicatesthat a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)is present in this battery or accumulator at a concentrationabove an applicable threshold specified in the Battery Directive.This product should be handed over to a designatedcollection point, e.g., on an authorized one-for-one basiswhen you buy a new similar product or to an authorizedcollection site for recycling waste electrical and electronicequipment (EEE) and batteries and accumulators. Improperhandling of this type of waste could have a possible impacton the environment and human health due to potentiallyhazardous substances that are generally associated with EEE.Your cooperation in the correct disposal of this product willcontribute to the effective usage of natural resources.For more information about the recycling of this product,please contact your local city office, waste authority, approvedscheme or your household waste disposal service or visitwww.canon-europe.com/weee, or www.canon-europe.com/battery.BIE-7203-000© CANON INC. 2017 Printed in TaiwanENGLISHPlease be sure to read the “Safety Precautions” section forcorrect use. After reading this Installation Guide, keep it in areadily accessible location for future reference. This camerais for indoor use only.* Some cameras are not available in certain countries or regions.WARNING To reduce a risk of fire or electric shock, donot expose this product to rain or moisture.Caution Request a professional installer for all installationwork. Never try to install the camera yourself.Doing so may result in unforeseen accidentssuch as dropping the camera or electric shock.Check Included ItemsCamera Warranty CardInstallation Guide (This document)Symbols Indicating Camera Model: VB-S910F : VB-S900F Mk II/VB-S905F Mk IINetwork Camera/ /Installation Guide

/ 2

Related manuals for Canon VB-S900F MkII