Canon VC-C3 User Manual

Also see for VC-C3: Pin assigments guide Instruction manual

Contents

Canon VC-C3 User Manual Manual pdf 16 page image

PRESET CYCLE MODETo access the Preset Cycle Mode window, choose ‘Preset Cycle Mode’under the ‘System Menu’ in the upper left corner of the applicationwindow.The Preset Cycle Mode can be used to cycle the VC-C3 camera through6 presets, one preset at a time.Using the Preset Cycle Mode:1. Using the IR Remote or the Control Software, set the presetpositions you want the camera to cycle through. The VC-C3 camerawill always cycle through ALL six preset positions, whether they havebeen defined by the user or not.2. Using the Set Cycles box, enter a value that will represent thenumber of times the VC-C3 camera should cycle through all sixpresets.3. Use the numbered radio buttons to specify the number of secondsthe VC-C3 camera will remain on each preset.4. Press Start or Stop to begin or end the preset cycling.The Accumulated Cycles box will provide feed back as to the numberof completed cycles. (A cycle is when all six presets have been accessed.)NOTE: The Preset Cycle window’s title will change to reflect thecurrent preset position the VC-C3 camera is at while the Preset CycleMode is running.14