128 External ConnectionsIMPORTANT• Observe the following precautions while the ACCESS indicator is on orflashing. Failing to do so may result in permanent data loss.- Do not open the memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• When copying photos onto an Eye-Fi card, photos will be uploadedautomatically if you are within the range of a configured network. Alwaysverify that Eye-Fi cards have been approved in the country/region ofuse. See also Using an Eye-Fi card (0 146).NOTES• In the following cases, you will not be able to copy recordings to thememory card:- If the memory card slot is open.- If the LOCK switch on the memory card is set to prevent writing.- If there is no memory card in the memory card slot.• Scenes that were edited using the supplied software ImageMixer 3 SEand were then written back to the camcorder cannot be copied to thememory card.• If there is not enough space on the memory card, as many photos aspossible will be copied before stopping the operation.Saving Recordings on a ComputerMovies recorded with this camcorder are saved in the built-in memory( only) or on the memory card. Because space is limited,make sure to save your recordings on a computer on a regular basis.Carefully read the information in SDXC Memory Cards (0 37)before performing the procedure using recordings made on an SDXCmemory card.Saving MoviesWith the supplied software ImageMixer 3 SE you can save scenes toyour computer. If necessary, video files previously saved on acomputer can be restored back to the camcorder. The software alsooffers many options for organizing your video library, editing video andmore.
