218 Additional InformationList of Messages for the Optional Video Light-/, List of Messages for Connecting to an External Hard Drive-/, List of Messages for Wi-Fi FunctionsBattery charge is low. Cannot use the accessory attached to the mini advanced shoe.- The battery charge is too low to supply power to the accessory attached to the mini advancedshoe. Charge the battery pack.Cannot use the video light while powering the camcorder with the compact power adapter- Use a fully charged battery pack instead when using the video light.Cannot use the video light with the attached battery pack- When using the video light, use the supplied BP-718 or optional BP-727 Battery Pack.Error writing to external hard drive- This message will appear the next time you turn on the camcorder if power supply was acci-dentally interrupted while the camcorder was writing to the external hard drive. Select[Recover] to try to recover the recordings.Quickly erases all files and deletes partitions from the external hard drive. Initialize?- If you initialize the hard drive, all data it contains will be lost, including any partitioned drives.If necessary, back up data and then initialize the hard drive with the camcorder.The compact power adapter was disconnected. Could not safely remove the external harddrive.- While the camcorder was connected to an external hard drive, the camcorder’s compactpower adapter was disconnected and the connection was ended. Check whether data in thehard drive was corrupted.An error occurred during FTP communication File transfer was not completed- Turn off the camcorder and FTP server. After a short while, turn them on again and try to sendthe data again.An error occurred while communicating to the computer (Network Utility) File transfer wasnot completed- Cordless phones, microwave ovens, refrigerators and other appliances may interfere with thewireless signal. Try using the camcorder in a location farther away from such appliances.- Turn off the camcorder and wireless router. After a short while, turn them on again and try tosend the data again. If the problem persists contact a Canon Service Center.COPY
