Video 87Onscreen Displays and Data CodeYou can turn most onscreen displays on or off.Repeatedly press h to turn the onscreen displays on/off in thefollowing sequence:mode:• All displays on• Most displays off*and modes**:• Only data code on• All displays on* Pressing h will turn off most of the icons and displays that appear automati-cally but will not remove onscreen displays that were turned on manually (forexample, onscreen markers or the audio level meter).** Touch the screen to display the playback controls.Rating ScenesYou can assign a rating to the scenes you record. Later, you canchoose just the scenes of a particular rating to play back or edit.Rating Scenes Right After RecordingYou can rate your scenes immediately after recording them. Doing sowill allow you to assign a rating while the scene is still fresh in yourmemory.Operating modes:About the Data CodeWith every scene or photo recorded, the camcorder keeps a data code(date/time of recording, information about the camera setup, etc.). Youcan select the information to be displayed with the y/z 8[Data Code] setting.COPY
