Canon VIXIA HF R20 Instruction Manual

Also see for Vixia HF R20: Instruction manual Brochure & specs Product guide Instruction manual Quick guide

Contents

Canon VIXIA HF R20 Instruction Manual Manual pdf 49 page image

Quick Start FunctionWhen you close the LCD panel with the camcorder on, the camcorderenters the standby mode. In standby mode the camcorder consumesonly about 1/3 the power used when recording, saving energy whenyou are using a battery pack. Additionally, when you open the LCDpanel, the camcorder is ready to start recording in approximately1 second*, allowing you to record the subject right away.* The actualtime requiredvariesdepending on the shooting conditions.Operating modes: I1 With the camcorder on and in a recording mode, close the LCDpanel.A beep will sound and the green ON/OFF (CHG) indicator will changeto orange to indicate the camcorder entered standby mode.2 When you wish to resume recording, open the LCD panel.The ON/OFF (CHG) indicator turns back green and the camcorder isready to record.IMPORTANTDo not disconnect the power source during standby mode (while theON/OFF (CHG) indicator is lit in orange),(_) NOTESThe camcorder will not enter standby mode if the LCD panel is closedwhile the ACCESS indicator is on or flashing, or while a menu is beingdisplayed. The camcorder may also not enter standby mode if the LCDpanel is closed when the battery charge is too low. Check that the ON/OFF (CHG) indicator changes to orange.• About standbymode and auto power off:- The camcorder will power off automatically if left in standby mode for10 minutes, Press [_IR_ to turn on the camcorder,- You can select the length of time until shut-off or turn off the QuickStart function altogether with the _ _ [Power Saving Mode] _[Quick Start (Standby)[ setting,- The usual 5-minute auto power off setting of [Power Saving Mode] isnot applicable while the camcorder is in standby mode.Smart AUTO Mode * 49