230Trouble?Indicators and Onscreen Displaysappears (in red) on the screen.- Battery pack is exhausted. Replace the battery pack with a fullycharged one.appears (in red) on the screen.- The camcorder cannot communicate with the battery packattached so the remaining battery charge cannot be displayed.appears (in red) on the screen.- A memory card error occurred. Turn off the camcorder. Removeand reinsert the memory card. Initialize the memory card if the dis-play does not change back to normal.(in red) and [End] appear on the screen.- The memory card is full. Replace the memory card or delete somerecordings (A 69) to free some space on the memory card.Even after stopping recording, the ACCESS indicator does not gooff.- The scene is being recorded in the memory. This is not a malfunc-tion.The red POWER/CHG indicator flashes rapidly (one flash at 0.5-sec-ond intervals).- The temperature of the battery pack is outside its operating range(approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack,warm it or let it cool down, as necessary, and try charging it again.- Charge the battery pack in temperatures between approximately0 °C and 40 °C (32 °F and 104 °F).- The battery pack is damaged. Use a different battery pack.- Charging has stopped because the compact power adapter or thebattery pack is faulty. Consult a Canon Service Center.
