26 IntroductionMemory operationRecord, Record pause, Playback, Playback pause, Fast playback,Fast reverse playback, Slow playback, Slow reverse playback,Frame advance, Frame reverse.Remaining battery time• The icon shows a rough estimateof the remaining charge as apercentage of the full charge ofthe battery pack. The remainingrecording/playback time of the battery pack is displayed, in minutes, next to the icon.• When is displayed in red, replace the battery pack with a fully charged one.• When you attach an empty battery pack, the power may turn off without displaying .• The first time you use a battery pack, fully charge it and then use the camcorder untilthe battery pack is completely exhausted. Doing so will ensure that the remainingrecording time will be displayed accurately.• Depending on the conditions under which the camcorder and the battery pack areused, the actual battery charge may not be indicated accurately.• When the camcorder is off, press to display the charge status of abattery pack. The Intelligent System will display the charge status (as a percentage)and the remaining recording time (in minutes) for 5 seconds. If the battery pack isexhausted, the battery information may not be displayed.Remaining recording timeWhen there is no more free space on the memory, “ End” (built-in memory,only) or “ End” (memory card) will be displayed and the recording will stop.24F progressive frame rateSelect the 24F progressive frame rate ( 60) to give your recordings a cinematic look.You can combine this frame rate with the [ Cine Mode] recording program toenhance the effect.Number of available photosin red: There is no memory card in the camcorder.in green: 6 or more photos in yellow: 1 to 5 photos in red: No more photoscan be recorded.• When viewing the photos, the display will always be in green.• Depending on the recording conditions, the number of available photos displayedmay not decrease even after a recording has been made, or may decrease by 2photos at once.100% 75% 50% 25% 0%BATT.INFOCOPY
