Additional Information 191Disc access failure. Check the disc.- There was an error when reading the disc or attempting to write onto it.- This message can appear also if condensation has formed (0 199). Wait until the DVDburner dries completely before resuming use.- The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it aftercleaning the recording surface with a clean, soft cloth. If the problem persists, replace with adifferent disc.Error reading the data- Check that the USB cable was not accidentally disconnected.No disc- Insert a disc into the DVD Burner.- This message can appear also if condensation has formed (0 199). Wait until the DVDburner dries completely before resuming use.No photos- There are no photos to add to the disc.No scenes- There are no scenes to add to the disc.No scenes left to add- There are no scenes that have not already been added to discs created previously.Operation canceled- The USB cable was disconnected and the operation was canceled. Check the USB connection.- The scenes selected to be written on the disc include scenes recorded in MXP mode. Add tothe playlist in advance only those scenes recorded in other recording modes and create thedisc from the [Playlist] index screen.Unable to recover data- Could not recover a corrupted file. Save your recordings (0 133) and initialize the memoryusing the [Complete Initialization] option (0 40).Direct Print Related MessagesData transfer error- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn theprinter back on and reconnect the USB cable.- You attempted to print from a memory card that contains a large number of photos. Reducethe number of photos.File error- You attempted to print a photo that was recorded with another camcorder, has a differentcompression, or was edited on a computer.COPY
