Canon VIXIA HFM300 Instruction Manual

Also see for VIXIA HF M30: Software guide Instruction manual Reference guide Firmware update procedure Instruction manual

Contents

Canon VIXIA HFM300 Instruction Manual Manual pdf 98 page image

To capture the photos1 Play back the scene from which you want to capture the photo.2 Pause the playback at the point you want to capture.3 Press !PHOTO fully.To capture a photo sequence, hold PHOTO I pressed down. The scenewill be played back by frames and each frame captured as a separatephoto.4 Touch [m] to return to the index screen.O IMPORTANT• When capturing photos on an Eye-Fi card, photos will be uploadedautomatically if you are within the range of a configured network. Alwaysverify that Eye-Fi cards have been approved in the country/region ofuse. See also Using an Eye-Fi card ([_ 146).(_ NOTES• The data code of the photos will reflect the date and time of recording ofthe original scene.• Photos captured from a scene with a lot of fast movement may beblurred.• _ Photos will be recorded on the memory selected for record-ing photos.• [Djj Photo Sequence]:- Up to 1 O0 photos can be captured at a time.- The photo sequence capture will stop when the end of the scene isreached (playback will pause at the beginning of the following scene).- Photos will be captured at intervals of 1/30 second (1/24 second, ifthe scene was recorded at a frame rate of [13"-J_lPF24]).Dividing ScenesYou can divide scenes (original scenes only) in order to leave out thebest parts and later cut out the rest.Operatingmodes: H1 Open the [Original] index screen.98 • Video